Home > Product
Information > Category 4
JUMBO FLANGE & GASKET
DESCRIPTION
A 100% pure wax gasket for setting all floor outlet toilet bowls. This ring contains 40% more wax than the regular FLANGE & GASKET.
Ideal to use where the regular ring does not provide enough wax to make a good seal. The gasket forms a water tight, gas tight and odor tight seal. Fits
3” and 4” waste lines. Meets Federal Specification TT-P-1536A. This ring has a plastic flange which extends the discharge opening. This makes for a more
positive seal and assures proper bowl alignment.
DIRECTIONS
-
Be sure the wax ring is at room temperature (about 70°F). If wax ring is too cold a good seal may not be
a made or the toilet bowl could crack while making the installation.
-
With the toilet bowl upside down on a protective pad or blanket, place the wax ring around the discharge
opening, extending plastic flange away from the bowl. Press firmly to assure adhesion when the toilet is inverted.
-
Using Black Swan’s STAINLESS or STAY SOFT PUTTY make a putty ring about 1 inch high around the outside
rim of the toilet. This will make a seal between the toilet rim and the floor.
-
Carefully set toilet down on bolts and twist bowl slightly to spread wax and putty to make a tight seal.
Tighten bolts carefully to prevent breaking the bowl.
UPC NUMBER AND CARTON INFORMATION
| STOCK NO. |
SIZE |
UPC NUMBER |
CARTON CUBIC FEET |
| 04009 |
-- |
0 54647 04009 7 |
1.37 |
| MSDS
|
| Pricing
|
|
