Home > Product Information > Category 4

JUMBO FLANGE & GASKET WITH URETHANE AND BRASS BOLT KIT


DESCRIPTION

A urethane gasket made of tough, flexible and durable urethane.  This urethane gasket is then impregnated with wax.  The combination of urethane foam and the wax makes for a stronger, more resistant ring than regular wax rings and is guaranteed for 10 years.

 

This wax ring is also a jumbo ring.  It contains 40% more wax than regular rings.

 

This gasket forms a water tight, gas tight and odor tight seal.  Fits 3” and 4” waste lines.  Meets Federal Specification TT-P-1536A.  This ring has a plastic flange which extends the discharge opening.  This makes for a more positive seal and assures proper bowl alignment.  

The Black Swan Jumbo Flange & Gasket with Urethane and Brass Bolt Kit is the ideal wax ring kit to use when the floor is a little higher than the existing flange for the toilet.  You are getting extra wax and a stronger wax which will be needed to make a good seal in this “uneven” floor situations.  Also, you are getting extra long closet bolts (1/4” X 3-1/2” brass bolt kit – Stock No. 12171) which you will need because of the “uneven” floor situation.

 

DIRECTIONS

  1. Be sure the wax ring is at room temperature (about 70°F). If wax ring is too cold a good seal may not be a made or the toilet bowl could crack while making the installation.

  2. With the toilet bowl upside down on a protective pad or blanket, place the wax ring around the discharge opening, extending plastic flange away from the bowl.  Press firmly to assure adhesion when the toilet is inverted.

  3. Using Black Swan’s STAINLESS or STAY SOFT PUTTY make a putty ring about 1 inch high around the outside rim of the toilet.  This will make a seal between the toilet rim and the floor.

  4. Carefully set toilet down on bolts and twist bowl slightly to spread wax and putty to make a tight seal. Tighten bolts carefully to prevent breaking the bowl.

UPC  NUMBER  AND  CARTON  INFORMATION

 

STOCK NO. SIZE UPC NUMBER CARTON CUBIC FEET
04010  -- 0 54647 04010 3 1.37
MSDS
Pricing