Home > Product Information > Category 3

LIQUID FLUX

DESCRIPTION

A self-cleaning liquid flux for use with soft solders. Can be used on most metals except aluminum and some stainless steels. Makes joints quickly and easily.

DIRECTIONS

1. Remove soil, scale, or grit from area to be soldered.
   
2. Apply flux to surfaces to be soldered.
   
3. Heat to proper temperature for soldering.
   
4. After joint is made remove flux residues by thoroughly flushing inside of pipes.
   
5. Cover jar when not in use.

CAUTION

Contains zinc chloride. Avoid contact with eyes or skin. Harmful if swallowed. Eye contact: flush with water for 15 minutes. Get immediate medical attention. Skin contact: wash with water. Ingestion: drink plenty of water or milk. Get medical attention. Keep out of reach of children.

UPC NUMBER AND CARTON INFORMATION