Home > Product Information > Category 15

MARKING PAINT 

DESCRIPTION

A heavy duty, industrial paint with a water base formula that is fast drying, durable and non-clogging.  Use in marking construction, excavation sites, underground utilities, landscaping, etc. and will not wash away or damage grass.  Has an inverted tip marker for easy application.

COLORS

Black Swan's MARKING PAINT comes in 8 different colors.  The end user determines what color they need for their application.  

The "American Public Works Association" has certain colors designated for certain applications.  These are as follows:

DIRECTIONS

1. For best results, use when can is between 40° and 90°F (4° and 32°C).

2. Shake can vigorously, for at least one minute before and occasionally during use. 

3. Invert can and point spray button towards surface to be marked.  Hold can 4 to 6 inches above surface to be marked.

4. Press spray button to the side to actuate.

5. Use a steady even stroke while spraying. 

CONTENTS

CHEMICAL	CAS  NUMBER
TOLUOL	108-88-3
ACETONE	67-64-1
VM&P NAPHTHA	64742-89-8
HEXANE	110-54-3
PROPANE	74-98-6
N-BUTANE	106-97-8
TITANIUM DIOXIDE	13463-67-7
XYLENE	1330-20-7
ETHYL BENZENE	100-41-4

WARNING

Vapor harmful.  May affect the brain or nervous system causing dizziness, headache or nausea.  Causes eye, skin, nose and throat irritation.  Do not puncture or incinerate (burn) container.  Exposure to heat or prolonged exposure to sun may cause bursting.  Do not expose to heat or store at temperatures above 120°F (49°C).

Notice:  Reports have associated repeated and prolonged occupational over exposure to solvents with permanent brain and nervous system damage.  Intentional misuse deliberately concentrating and inhaling contents may be harmful or fatal.  

Vapors may ignite explosively.  Keep away from heat, sparks and flame.  Do not smoke.  Extinguish all flames and pilot lights, and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone prevent build-up of vapors by opening windows and doors to achieve cross ventilation.

Use only with adequate ventilation.  Do not breathe dust, vapors or spray mist.  To avoid breathing vapors or spray mist.  To avoid breathing vapors or spray mist.  To avoid breathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying.  If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH/MSHA approved) or leave area.  Close container after each use.  Avoid contact with eyes, skin, and clothing.

KEEP  OUT  OF  REACH  OF  CHILDREN

UPC  NUMBER  AND  CARTON  INFORMATION