Home > Product Information > Category 5

PENETRATING & CLEANING OIL

DESCRIPTION

Penetrates and loosens rust, tar, dirt, carbon and corrosion, even on stubborn, rusted bolts.  Reduces the tugging and pounding sometimes required to loosen screws and bolts.  Only a few drops are needed.  Accurate pinpoint control can be achieved with the extension tube which is included with each aerosol.  The low surface tension permits the oil to creep into tight spaces and along threaded fasteners.  PENETRATING & CLEANING OIL contains no acid.  Product is also effective against salt water corrosion.  

               DIRECTIONS

1. Shake well before using.  
2. Spray liberally and uniformly from a distance of 6-10 inches.  
3. Use firm finger pressure on sprayhead.  Always keep can pointed away from you.
4. For hard to reach areas, insert (with light twisting motion) sprayhead with extension tube attached. 
5. For best operation, use at room temperature. 

SPECIFICATIONS

Color(s)	Dark Amber
Odor	Hydrocarbon
Specific Gravity (@70°F)	0.70
Viscosity  (@70°F)	27±SEC/#1 Zahn Cup
Flash Point (Aerosol)	-50°F   T.C.C.
Boiling Point (Concentrate)	314-392°F
Minimum Sprayability	+50°F
Non-Volatile (Aerosol, % by Volume)	24%
Vapor Pressure (@70°F)	50-60-psig
Spray Pattern (@70°F)	Stream
Spray Rate (10 s @ 70°F)	8-10 g/10s
VOC Content (w/w)	76%

 

WARNING

 Contains petroleum distillates.  If swallowed do not induce vomiting. Call physician.  Exposure to heat may cause release of contents from top of rim of can.  Do not store in direct heat., sunlight or temperatures above 120°F.  Do not puncture or incinerate can.  Use only as directed.  Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. Keep out of reach of children. 

UPC NUMBER AND CARTON INFORMATION