Home > Product Information > Category 3

 SUPER-FLUX

DESCRIPTION

A self-cleaning water soluble flux. Works extremely well at high temperatures which is important when working with no-lead solders. Can be used on brass, copper, bronze or copper/brass alloys. Will not freeze or decompose and will emit no odor.

DIRECTIONS

1. Wipe flux around pipe and fittings before joining. No need to clean.
   
2. Apply heat to the parts (not the flux or solder).
   
3. Apply solder until it flows freely.
   
4. As soon as the solder rings the joint stop heating.
   
5. Do not move the joint until the solder cools.
   
6. Clean off excess flux with water.

CAUTION

Corrosive. Contains acid. Avoid contact with skin and eyes. Do not take internally. Avoid breathing vapors when soldering.

FIRST AID

Eyes - Flush with water for 15 minutes and call physician immediately. Internal - if swallowed, drink lots of water or milk and call physician immediately. Skin - wash area thoroughly.

UPC NUMBER AND CARTON INFORMATION