Home > Product Information > Category 4

SWAN WAX WITH URETHANE 

DESCRIPTION

A urethane gasket made of a tough, flexible and durable urethane foam. This urethane gasket is then impregnated with wax. The combination of the urethane foam and the wax makes for a stronger, more resilient ring than regular rings and is guaranteed for 10 years. Can be used for setting all floor outlet toilet bowls. The gasket forms a water tight, gas tight and odor tight seal. Fits 3” and 4” waste lines. Meets Federal Specification TT-P-1536A.

DIRECTIONS

1. Be sure the wax ring is at room temperature (about 70°F). If wax ring is too cold a good seal may not be a made or the toilet bowl could crack while making the installation.
2. With the toilet bowl upside down on a protective pad or blanket, place the wax ring around the discharge opening. Press firmly to assure adhesion when toilet is inverted.
3. Using Black Swan’s STAINLESS OR STAY SOFT PUTTY make a putty ring about 1 inch high around the outside rim of the toilet. This will make a seal between the toilet rim and the floor.
4. Carefully set toilet down in bolts and twist bowl slightly to spread wax and putty to make a tight seal.  Tighten bolts carefully to prevent breaking the bowl.

UPC NUMBER AND CARTON INFORMATION