CLOSET BOLTS – BRASS

 

          

---

Description

A solid brass closet bolt is used to secure toilet bowls to the ground. Bolts are sold in six different sizes. For each size bolt, there are five different ways to purchase:

1. Bulk-bolts, open-end nuts and washers packaged in bulk.

2. Bag-2 bolts, 2 open-end nuts and 2 round washers.

3. Bag-2 bolts, 2 open-end nuts, 2 round washers, and 2 plastic stand-up washers.

4. Bag-2 bolts, 4 open-end nuts and 4 round washers.

5. Bulk-closet bolts only packaged in bulk.

---

DIRECTIONS

1. Place bolt into position on flange with threaded portion up.
2. Apply BLACK SWAN'S PUTTY and BLACK SWAN WAX RING to base of toilet bowl. Then, set the toilet down carefully over bolts so threaded portion of bolts correspond with holes in base of bowl.
3. Place loose washer on bolts and then apply hex nuts firmly, but not so tight as to crack edge of the bowl base.
4. Cut any remaining threaded portion of bolts above nuts. If desired, decorator cap can then be placed over bolt and nuts.

---

 

UPC  NUMBER  AND  CARTON  INFORMATION
100  BOLTS,  100  OPEN-END  NUTS  AND  100  ROUND  WASHERS-BULK

2  BOLTS,  2  OPEN-END NUTS  AND 2  ROUND  WASHERS –BAGGED

 

 

2  BOLTS,  2  OPEN-END  NUTS,  2  ROUND  WASHERS  AND  2  PLASTIC  STAND-UP  WASHERS—BAGGED

 

2 BOLTS, 4 OPEN-END NUTS AND 4 ROUND WASHERS-BAGGED

 

 

CLOSET  BOLTS—ONLY—BULK