Flange & Gasket with Urethane Print E-mail
Products - Cat 4 - Wax Gaskets, Cold Solders, and Lubricants

DESCRIPTION

Black Swan's Flange & Gasket with Urethane is a urethane gasket made of a tough, flexible and durable urethane foam. This urethane gasket is then impregnated with wax. The combination of urethane foam and the wax makes for a stronger, more resilient ring than regular rings and is guaranteed for 10 years. Can be used for setting all floor outlet toilet bowls. The gasket forms a water tight, gas tight and odor tight seal. Fits 3” and 4” waste lines. Meets Federal Specification TT-P-1536A. This ring has a plastic flange which extends the discharge opening. This makes for a more positive seal and assures proper bowl alignment. For certain locations throughout the United States local codes require the plastic flange to fit 4" openings only.  Black Swan does have this product available (Stock No. 4570).


DIRECTIONS

1.   Be sure the wax ring is at room temperature (about 70°F). If wax ring is too cold a good seal may not be a made or the toilet bowl could crack while making the installation.

2.   With the toilet bowl upside down on a protective pad or blanket, place the wax ring around the discharge opening. Press firmly to assure adhesion when toilet is inverted.

3.   Using Black Swan’s Stainless or Stay Soft Putty make a putty ring about 1 inch high around the outside rim of the toilet. This will make a seal between the toilet rim and the floor.

4.   Carefully set toilet down in bolts and twist bowl slightly to spread wax and putty to make a tight seal.  Tighten bolts carefully to prevent breaking the bowl.


ACCESSORIES

Black Swan also sells Flange & Gasket with Urethane with closet bolts included in the package. Since closet bolts are necessary to make the installation, this is a nice package to offer the end user. Stock Number 04455 is Flange & Gasket with Urethane with two ¼” X 2-1/4” brass bolts, two brass plated nuts, two brass plated washers, and two plastic stand-up washers. Stock Number 04456 is Flange & Gasket with Urethane with two ¼” X 2-1/4” brass bolts, four brass plated nuts, and four brass plated washers. Stock Number 04460 is Flange & Gasket with Urethane with two ¼” x 2-1/4” brass plated bolts, two brass plated nuts, two brass plated washers and two plastic stand-up washers. Stock Number 04461 is Flange & Gasket with Urethane with two ¼” x 2-1/4” brass plated bolts, four brass plated nuts and four brass plated washers.


GHS Label Information 

PICTOGRAM:  None
SIGNAL WORD: None
HAZARDOUS STATEMENTS:
None 

FIRST AID
:

Inhalation: None. Skin: First-aid is not normally required. Wash affected area thoroughly with waterless cleaner and/or soap and water. If irritation persists, consult a physician. Eyes: First-aid is not normally required. Flush with large amounts of water for 15 minutes, holding eye lids open. Consult a physician if irritation persists. Ingestion: First-aid is not normally required. If swallowed, give two glasses of water to drink. Never give anything by mouth to an unconscious person. Do not induce vomiting. Consult a physician.

STORAGE:  

Store away from flame, heat (110°F maximum to keep wax rings from melting or deforming in shape) and strong oxidizing agents. Do not stack cases more than (7) high on each pallet.

DISPOSAL:

Dispose of product or container in accordance with federal, state or local regulations.

STOCK NO. SIZE UPC NUMBER CARTON CUBIC FEET
04450 -- 0 54647 04450 7 1.37
04455 -- 0 54647 04455 2 .672
04456 -- 0 54647 04456 9 1.37
04460 -- 0 54647 04460 6 1.37
04461 -- 0 54647 04461 3 1.37
GHS Safety Data Sheet
Buy Now