Urinal Gasket Print E-mail
Products - Cat 4 - Wax Gaskets, Cold Solders, and Lubricants

DESCRIPTION

Black Swan's Urinal Gasket is a urethane gasket made of a tough, flexible and durable urethane foam which is then impregnated with wax. This product is guaranteed for 10 years. Can be used on wall mounted urinals. The gasket forms a water tight, gas tight and odor tight seal. Meets Federal Specification TT-P-1536A.


DIRECTIONS

1.      Be sure the Urinal Gasket is at room temperature (above 70°F). If wax ring is too cold a good seal may not be a made or the urinal could crack while making the installation.

2.   Press Urinal Gasket onto horn outlet of urinal.

3.   Set urinal in place and twist gently to spread wax evenly to make a tight seal.

4.   Tighten flange bolts carefully to prevent cracking or chipping of the urinal.


GHS Label Information 

PICTOGRAM:  None
SIGNAL WORD: None
HAZARDOUS STATEMENTS:
None 

FIRST AID
:

Inhalation: None. Skin: First-aid is not normally required. Wash affected area thoroughly with waterless cleaner and/or soap and water. If irritation persists, consult a physician. Eyes: First-aid is not normally required. Flush with large amounts of water for 15 minutes, holding eye lids open. Consult a physician if irritation persists. Ingestion: First-aid is not normally required. If swallowed, give two glasses of water to drink. Never give anything by mouth to an unconscious person. Do not induce vomiting. Consult a physician.

STORAGE:  

Store away from flame, heat (110°F maximum to keep wax rings from melting or deforming in shape) and strong oxidizing agents. Do not stack cases more than (7) high on each pallet.

DISPOSAL:

Dispose of product or container in accordance with federal, state or local regulations.

STOCK NO. SIZE UPC NUMBER CARTON CUBIC FEET
04700 -- 0 54647 04700 3 .33
GHS Safety Data Sheet
Buy Now