No-Hub Sealant Print E-mail
Products - Cat 4 - Wax Gaskets, Cold Solders, and Lubricants

DESCRIPTION

Black Swan No-Hub Sealant is an amber colored, smooth flowing, semi-viscous liquid for use as a coating on black pipe to improve leak-free sealing of no-hub couplings. The high performance polymer resin compound is elastic and resists vibration and temperature change. It is a fast drying sealant that cures by solvent evaporation resulting in an elastic membrane that adheres to both pipe and coupling gasket, providing a flexible adherent membrane coating. Gaskets on nonporous surfaces may be taken apart at anytime without injury to sealed surface. Temperature range use from -65ºF to 400ºF (continuous use).

May be used on aluminum, brass, steels, copper, epoxies, plated metal, fiberglass, black pipe, galvanized pipe, glass, wood, paper, felt and cork. Should not be applied on painted surfaces, or plastic pipes, such as PVC, CPVC, or ABS.

Resistant to: Motor oils, hydraulic fluids, water, steam, diesel fuel oils, aviation fuels, aliphatic solvents (petroleum distillates), antifreeze, and gasoline. Conforms to MIL-S-45180D.


DRY TIME

No-Hub Sealant becomes tacky in 3 to 5 minutes. The connection will be ready for service in 10 to 15 minutes, depending on temperature and humidity. 


STORAGE STABILITY

Indefinite when stored in unopened can in cool place. Recommended storage temperature from 40ºF to 80ºF. 


DIRECTIONS

  1. Clean pipe of dirt and debris.
  2. Apply liberal coat of Black Swan No-Hub Sealant to pipe.
  3. Assemble joint quickly while No-Hub Sealant is still wet.
  4. Allow 10 - 15 minutes before testing joints.
  5. Pressure test often so as to eliminate possible large failures.

CAUTION

Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.

KEEP OUT OF REACH OF CHILDREN. 
FOR INDUSTRIAL USE ONLY.


FIRST AID

If exposed to high concentration of vapor or spray mist remove patient to fresh air; if breathing difficulty or unconsciousness occurs call a physician and have label information available. In case of skin contact, flush with plenty of water; for eyes immediately flush with plenty of water for 15 minutes and get medical attention.  Do not take internally.  If swallowed do not induce vomiting. Call a physician immediately.


UPC NUMBER AND CARTON INFORMATION

STOCK NO. SIZE UPC NUMBER CARTON CUBIC FEET
04085   qt. 0  54647  04085  4   .711
GHS Safety Data Sheet
Buy Now