Black Swan's 50/50 Solder is a 50% tin and 50% lead alloy. Melting point ranges in 361° F to 421° F. Use for tin plating, sheet metal repair and copper DWV systems. Contains lead. Not for use on drinking water lines.
Tin (CAS 7440-31-5), Lead (CAS 7439-92-1).
- Select proper copper tubing, proper thickness, proper connectors and proper heat source.
- Clean area to be soldered of any copper oxide using Black Swan's Sand Cloth, Screen Cloth or Fitting Brushes. Also, make sure there is no grease, dirt or oil on the area to be soldered.
- Apply appropriate flux to area to be soldered.
GHS LABEL INFORMATION
SIGNAL WORD: DANGER.
HAZARDOUS STATEMENT: None.
Keep out of reach of children. Avoid breathing of dust/fumes/gas/mist/vapors/spray. Wash thoroughly after handling. Do not eat, drink, or smoke when using this product. Use only outdoors or in well-ventilated area.
Eyes: Flush with plenty of water for at least 15 minutes. If irritation persists, get medical attention.
Skin: Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water.
Inhalation: Move into fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and call physician.
Ingestion: Get medical attention if large quantities of material have been ingested. (Unlikely)
Store in cool, dry, well-ventilated area away from incompatible materials. Keep away from heat, sparks, open flame and other sources of ignition. Incompatible Materials: Acids, bases and oxidizers.
DISPOSAL: Dispose of container in accordance with federal, state or local regulations.
UPC Number and Carton Information
|STOCK NO.||SIZE||UPC NUMBER||CARTON CUBIC FEET|
|03405||1/2 lb.||0 54647 03405 8||.0372|
|03410||1 lb.||0 54647 03410 2||.0372|