Black Swan's Rust-A-Way is a specially formulated compound that removes iron, rust, and other contaminants from most materials and surfaces. Ideal for use on tubs, sinks, water heaters, piping, tile, tools, chrome, steel and even white clothes.
Iron is a natural ingredient in most water supplies. It is not noticeable because it is colorless. However, when iron is exposed to air it oxidizes and can form insoluble rust stains. These stains can appear on anything that has contact with water - toilets, water heaters, dishwashers, clothes that are washed in water, water softener cleaners, etc.
DIRECTIONS FOR IRON AND RUST REMOVAL
GLASSWARE, CHINAWARE, PORCELAIN, CHROME, CONCRETE, METAL SURFACES, ETC:
Wet a small area and rub on Black Swan Rust-A-Way on the area, moisten and leave on 5 minutes. Repeat several times if necessary. When iron and rust spots have disappeared, rinse surface thoroughly with water.
DISHWASHERS OR WASHING MACHINES:
With the machine empty, add 1/4 lb. of Black Swan Rust-A-Way instead of soap. Run machine thru normal cycle. Repeat if necessary.
Dissolve 1/4 lb. or Black Swan Rust-A-Way in one quart or warm water and dip stained portion of clothing in the solution for a few minutes. Rub lightly and rinse thoroughly. Always test a small piece of the fabric first, as this treatment may harm or discolor some items.
TOILET BOWLS AND FLUSH TANKS:
Remove any in-tank cleaners and flush. For toilet bowls add 1/4 lb. of Black Swan Rust-A-Way to bowl. Saturate sides under rim with toilet brush. Let stand until stain is gone. Repeat as needed. For flush tanks raise water level above stained area. Add 1/4 lb. of Black Swan Rust-A-Way. Let stand overnight. Repeat as necessary.
DIRECTIONS FOR WATER SOFTENER CLEANER
Begin by preparing a solution of 1 lb. of Black Swan's Rust-A-Way in one gallon of warm water in glass or plastic container, then treat per manufacturer's instructions or by the type of softener.
SOFTENER WITH PRESSURE BRINE TANKS:
The best time to clean a softener is when the brine tank requires refilling with salt. With the water drained down in the brine tank, add the solution to the top opening. Fill with salt and continue operation as usual. Refrigerate softener.
SOFTENER WITHOUT BRINE TANKS:
Regenerate softener as usual, but add the solution through the opening along with the salt.
Backwash and regenerate with salt as usual. Add solution and let stand for one hour. Rinse thoroughly.
Follow the manufacturer's instructions to regenerate the water softener. Pour the solution into the storage tank brine well and start regeneration cycle immediately. Allow the softener to finish regeneration.
CAUTION AND FIRST AID
Persons with respiratory problems should not use this product. Avoid breathing vapors after mixing with water. Good ventilation is important, as strong vapor will result. Never mix in a closed container.
Avoid contact with eyes and skin. If swallowed, give large quantities of milk or water. Call a physician immediately. In case of contact with eyes, flush with water for 15 minutes. Call a physician.
Contains Sodium Hydrosulfite and Sodium Bisulfite.
UPC Number and Carton Information
|STOCK NO.||SIZE||UPC NUMBER||CARTON CUBIC FEET|
|03160||18 oz.||0 54647 03160 6||.279|