Black Swan's Gasket Aide is an amber liquid gasket coating that can provide leak-free, chemically resistant, and pressure enhanced sealing when used with paper, felt, cork, fiber, treated, synthetic, composite, metal or rubber gaskets. It is an efficient drying sealant that cures into a high performance elastomeric polymer membrane (by solvent evaporation) and adheres to both coupling and gasket. Conforms to MIL-S-451800.
Ethyl Alcohol (CAS 64-17-5), Methyl Alcohol (CAS 67-56-1), Ethyl Acetate (CAS 141-78-6), Acetone (CAS 67-64-1), Polyvinyl Butyral (CAS 7723-18-5).
- Completely clean the product area the gasket will be seated on.
- Method 1: Apply a continuous and even coating of product to both surfaces to be sealed. Allow to air dry for 2 to 5 minutes. Put gasket into place and assemble parts. Secure or tighten to recommended specs. Allow 1 hour at room temperature before use.
- Method 2: Pre-coat the gasket on one side. Allow to air dry for 2 to 5 minutes. Put gasket into place (coating against part). Coat other side of gasket, Allow to air dry for 2 to 5 minutes. Assemble parts. Secure or tighten to recommended specs. Allow 1 hour at room temperature before use.
- Remove excess with Denatured Alcohol (Ethyl Alcohol 95% or Anhydrous), Isopropyl Alcohol (95% or Anhydrous), or Butyl Cellosolve.
GHS LABEL INFORMATION
Health Hazard Flammable
SIGNAL WORD: DANGER
Highly flammable liquid and vapor. May be fatal if swallowed and enters airways. Harmful in contact with skin. Causes serious eye irritation. Harmful if inhaled. May cause respiratory irritation. May cause drowsiness or dizziness.
Keep out of reach of children. Read label before use. Keep away from heat/spark/open flames/hot surfaces – no smoking. Keep container tightly closed and cooled. Take precautionary measures against static discharge. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. Wear a NIOSH approved respirator for organic solvents.
Skin: Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water.
Ingestion: Give 1 or 2 glasses of water. DO NOT INDUCE VOMITING. Contact physician immediately.
Inhalation: Move into fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and call physician.
Keep and store in a cool, dry place away from sources of ignition. Ground during transfer. Keep container tightly closed when not in use. Incompatible Materials: Strong oxidizing agents, strong acids.
Dispose of container in accordance with federal, state or local regulations.
UPC Number and Carton Information
|STOCK NO.||SIZE||UPC NUMBER||CARTON CUBIC FEET|
|04240*||1/4 pt.||0 54647 04240 4||.222|
|04242**||1/4 pt.||0 54647 04242 8||.222|
* Dauber in cap