Liquid Pipe Coating

DESCRIPTION

Black Swan Liquid Pipe Coating is an asphalt based liquid coating that can be used to coat valves, fittings, flanges, bolts and cast iron pipe going underground. Provides superior waterproof protection. Can be applied with a brush or roller.


PHYSICAL CHARACTERISTICS

Weight Per Gallon, lbs. 7.7 - 7.9
Residue by Evaporation, % 70 Min.
Combustible Solvents Mineral Spirits
Consistency Spray or Brush
Cure Time 4 -8 hours to set
7 - 14 days to full cure
depending on weather
Application Temperatures 50°F min / 120°F max
Flammability (flash point, °F solvent) 105°
Clean up Tools Mineral Spirits, Kerosene


PRECAUTIONS

Protective clothing and eye wear should be used during application of this product. When transporting this product, ensure that lid is tight and pail secure and upright. Do not allow pail to tumble as this may cause lid to loosen and leakage to occur. Do not store at temperatures above 120° F. Do not reuse empty containers.


CAUTION

Contains petroleum distillates. Keep away from heat, sparks and open flame. Use only with adequate ventilation. Avoid prolonged or repeated contact with skin and breathing of vapor. If swallowed do not induce vomiting. Call physician immediately. Seal container when not in use. Keep out of reach of children.



UPC Number and Carton Information
STOCK NO. SIZE UPC NUMBER CARTON CUBIC FEET
04190 5 gal. 0 54647 04190 2 1.375