Urinal Felt Wax Ring

DESCRIPTION

Black Swan's Urinal Felt Wax Ring is a felt wax ring impregnated with wax used for setting floor or wall toilet bowls. Dimensions are 3-3/4" O.D., 2" I.D. x 3/4" thick. This ring is especially useful where rodents eat through regular wax bowl rings.

DIRECTIONS

1. Be sure the Urinal Felt Wax Ring is at room temperature (about 70° F). If wax ring is too cold a good seal may not be made or the urinal could crack while making the installation.
2. Press Urinal Felt Wax Ring onto horn outlet of urinal.
3. Set urinal in place and twist gently to spread wax evenly to make a tight seal.
4. Tighten flange bolts carefully to prevent cracking or chipping of the urinal.

GHS LABEL INFORMATION

PICTOGRAM: None

SIGNAL WORD: None

HAZARDOUS STATEMENT: None


FIRST AID:
Skin: First aid is not normally required. Wash affected area thoroughly with waterless cleaner and/or soap and water. If irritation persists, consult a physician.
Eyes: Firs aid is not normally required. Flush with large amounts of water for 15 minutes, holding eyelids open. Consult a physician if irritation persists.
Ingestion: First aid is not normally required. If swallowed, give two glasses of water to drink. Never give anything by mouth to an unconscious person. Do not induce vomiting. Consult a physician.
Inhalation: None

STORAGE:
Store away from flame, heat (110° F maximum to keep wax rings from melting or deforming in shape) and strong oxidizing agents. Do not stack cases more than seven high on each pallet. .

DISPOSAL:
Dispose of container in accordance with federal, state or local regulations.