Pipe Wrap Tape

Print Information Sheet Return To Previous Search
*This product does not require a GHS Safety Data Sheet.

DESCRIPTION

Black Swan's Pipe Wrap Tape is a PVC plastic tape with a high tack adhesive that can be used on steel, galvanized, electrical conduit, cast iron pipe, and ductile iron pipe. Can be used above and below ground. Can be effective in all weather conditions. Provides corrosion protection, protects against fungus and bacteria, provides a dielectric barrier between the pipe and soil, and resists common chemicals and vapors. It is strongly recommended to use Black Swan Pipe Wrap Primer before applying tape. IAPMO approved.


DIRECTIONS

  1. Clean pipe surface of dirt and debris. Remove any burrs or sharp edges on pipe.
  2. Apply Black Swan Pipe Wrap Primer evenly over the surface of the pipe.
  3. Allow primer to dry. Dry time depends on weather conditions, but usually takes 3 to 5 minutes.
  4. Weld beads should be covered with one layer of tape before main wrap is done.
  5. Apply Pipe Wrap Tape to pipe covering the entire length of the pipe. Generally, a ½” overlay is recommended for a superior application.


UPC Number and Carton Information
STOCK NO. SIZE CASE PACK CASE WEIGHT CARTON CUBIC FEET UPC NUMBER
10270* 1” x 100’ 48 28 0 54647 10270 2
10275* 2” x 100’ 24 28 0 54647 10275 7
10280* 4” x 100’ 12 28 0 54647 10280 1
10300** 1” x 100’ 48 55 0 54647 10300 6
10305** 2” x 100’ 24 55 0 54647 10305 1

*10 mil

** 20 mil